• AIR BALL LIFTER
  • ABL-38D
  • Supporting device for transfer of molding and heavy materials
  • Easy transport with 360 degree free transport direction.
    More advanced performance through forced up and down.



The Usage of Air Ball Lifter

  • When replacing mold of press, it supports mold and sets precisely through rising ball.
  • Transport weight object.

Features of Air Ball Lifter

  • Strong ascending force - Support 130kgf per 1 ball (Based on 5 kgf/㎠)
  • Able to rise / descend compulsory by turning on / off valves only.
  • Able to change into acetal ball to protect product.
  • Increase number of balls in accordance with the desired the ascending force.
  • Able to install at the desired location in case of single type. [However, ascending force of single type: 65 kgf in accordance with 1 ball (based on 5kgf/㎠)]

Application Example


Air Ball Lifter Specification (ABL-38D series)

MODEL No. of balls Lifiting Force kN(kgf) Down Force kN(kgf) Length A(mm)
Air Pressure MPa(kgf/㎠) Air Pressure MPa(kgf/㎠)
0.4 (4.08) 0.5 (5.10) 0.6 (6.12) 0.7 (7.14) 0.4 (4.08) 0.5 (5.10) 0.6 (6.12) 0.7 (7.14)
ABL38D-1B-100 1 0.62 (64) 0.78 (79) 0.93 (95) 1.09 (111) 0.04 (4) 0.05 (5) 0.06 (6) 0.07 (7) 100
ABL38D-2B-150 2 1.25 (127) 1.56 (159) 1.87 (191) 2.18 (222) 0.08 (8) 0.10 (10) 0.12 (12) 0.14 (14) 150
ABL38D-3B-200 3 1.87 (191) 2.34 (238) 2.80 (286) 3.27 (334) 0.12 (12) 0.15 (15) 0.18 (18) 0.20 (21) 200
ABL38D-4B-250 4 2.49 (254) 3.11 (318) 3.74 (381) 4.36 (445) 0.16 (16) 0.19 (20) 0.23 (24) 0.27 (28) 250
ABL38D-5B-300 5 3.11 (318) 3.89 (397) 4.67 (477) 5.45 (556) 0.19 (20) 0.24 (25) 0.29 (30) 0.34 (35) 300
ABL38D-6B-350 6 3.74 (381) 4.67 (477) 5.60 (572) 6.54 (667) 0.23 (24) 0.29 (30) 0.35 (36) 0.41 (42) 350
ABL38D-7B-400 7 4.36 (445) 5.45 (556) 6.54 (667) 7.63 (778) 0.27 (28) 0.34 (35) 0.41 (42) 0.48 (49) 400
ABL38D-8B-450 8 4.98 (508) 6.23 (635) 7.47 (763) 8.72 (890) 0.31 (32) 0.39 (40) 0.47 (48) 0.54 (56) 450
ABL38D-9B-500 9 5.60 (572) 7.01 (715) 8.41 (858) 9.81 (1001) 0.35 (36) 0.44 (45) 0.53 (54) 0.61 (63) 500
ABL38D-10B-550 10 6.23 (635) 7.78 (794) 9.34 (953) 10.9 (1112) 0.39 (40) 0.49 (50) 0.58 (60) 0.68 (70) 550
ABL38D-11B-600 11 6.58 (699) 8.56 (874) 10.3 (1048) 12.0 (1223) 0.43 (44) 0.54 (55) 0.64 (66) 0.75 (76) 600
ABL38D-12B-650 12 7.47 (763) 9.34 (953) 11.2 (1144) 13.1 (1334) 0.47 (48) 0.58 (60) 0.70 (71) 0.82 (83) 650
ABL38D-13B-700 13 8.10 (826) 10.1 (1033) 12.1 (1239) 14.2 (1446) 0.51 (52) 0.63 (65) 0.76 (77) 0.89 (90) 700
ABL38D-14B-750 14 8.72 (890) 10.9 (1112) 13.1 (1334) 15.3 (1557) 0.54 (56) 0.68 (70) 0.82 (83) 0.95 (97) 750
ABL38D-15B-800 15 9.34 (953) 11.7 (1191) 14.0 (1430) 16.3 (1668) 0.58 (60) 0.73 (74) 0.88 (89) 1.02 (104) 800
ABL38D-16B-850 16 9.96 (1017) 12.5 (1271) 14.9 (1525) 17.4 (1779) 0.62 (64) 0.78 (79) 0.93 (95) 1.09 (111) 850
ABL38D-17B-900 17 10.6 (1080) 13.2 (1350) 15.9 (1620) 18.5 (1890) 0.66 (68) 0.83 (84) 0.99 (101) 1.16 (118) 900
ABL38D-18B-950 18 11.2 (1144) 14.0 (1430) 16.8 (1716) 19.6 (2002) 0.70 (71) 0.88 (89) 1.05 (107) 1.23 (125) 950
ABL38D-19B-1000 19 11.8 (1207) 14.8 (1509) 17.7 (1811) 20.7 (2113) 0.74 (75) 0.92 (94) 1.11 (113) 1.29 (132) 1000

※ Specifications and sizes of the product can be changed without prior notice according to the product development process of the head-quarter.

※ The material of the ball provided in the standard specification is SUJ2 (bearing steel), and it can be changed to SUS(Stainless steel) & ACETAL material on request.

Caution when use

Ceiling capacity load in the table indicates supportable weight in "a stationery state"However, since the purpose of use of ball lifter is not just to support, durability might significantly decrease due to ball bearing tolerance and friction resistance according to roughness when design. Therefore it is recommended ABL-38D series is designed to be below 50% of the stated load, ABL-50D series is designed to be below 70% of the stated load.

Air Ball Lifter Outside View [ABL-38D]

※ These specifications and dimensions are for reference only.
And these are subject to change without prior notice depending on the product development process of our company.

※ If processing of the assembly is required, be sure to check the actual size of the product for the relevant.

Precautions of Air Ball Lifter

  • Observe the working pressure in accordance with the weight to support (Recommended pressure : higher than 5 kgf/㎠)
  • Recommended air pressure: 3~6kg/㎠
  • Recommended air temperature: 0~60℃
  • Recommended operating time: 8 hour/1 day
  • Recommend to use the air filter at front section for installation of product.
  • Install guide line / Safety wall definitely for safety in case of transportation of weights.