• AIR FEEDER
  • AF-SERIES
  • Automatic supply device for press materials
  • Transfer flat and thin boards at precise allowance
    ±0.025(mm) supplied to press etc.



Usage of Air Feeder

  • Supply automatically the thin board mainly in the field of press.
  • Able to apply to the thin board with figure and to the works of which specific measurements are required.
  • Available to simple cutting works.

Features of Air Feeder

  • Transport accuracy ±0.025mm
  • Able to provide feed of transport by spool valve.
  • Reduce the material and weight according to the method of downward piston
  • Maintain the degree of precision and reduce noise since there is pneumatic buffer.
  • Able to choose push or press with one machine.
  • Improve SPM by choosing compress type pilot valve.
  • Reduce air consumption by using compress type cylinder.

Application Example

Video

Air Feeder Specification

Model AF-0405 S AF-0415 S AF-0607 S AF-0620 S AF-1010 S AF-1015 S AF-1030 S AF-1515 S AF-1530 S AF-2020 D AF-2515 D AF-2525 D AF-3016 D AF-3030 D
Maximum material width
(mm)
40 40 60 60 100 100 100 150 150 200 200 250 300 300
Maximum feed length
(mm)
50 150 70 200 100 150 300 150 300 200 150 250 160 300
Maximum material tickness
(mm)
1.2 1.2 2 1.0 2.3 1.8 1.4 2.3 1.8 2.3 2.3 2.5 2.5 2.5
Maximum air pressure
(kg/㎠)
within 4~5 within 4~5 within 5~6 within 5~6 within 5~6 within 5~6 within 5~6 within 5~7 within 5~7 within 5~7 within 5~7 within 5~7 within 5~7 within 5~7
Strokes per minute
(Max.SPM)
200 60 200 50 165 150 50 120 45 60 110 60 90 50
Fixed clamp pressure
(kg)
60 60 122 122 158 158 198 198 366 366 366 492 647 647
Mobile clamp pressure
(kg)
60 60 122 122 158 158 198 198 366 366 366 492 647 647
Tensile stength
(kg)
17 17 33 33 47 47 63 63 82 126 126 163 163 163
Air consumption
(ℓ/min)
32 26 78 48 124 124 145 178 254 376 310 423 350 363
Product weight
(kg)
3.2 4.2 5.2 7.5 10.8 12 20 17.2 25 32.2 31 49.6 52 65

※ Max.SPM corresponds to the push type. The pull type is within 50% of Max.SPM of the push type.[It depends on the strokes(feed distance).]

※ All products in the above table should be used with uncoiler(or reel stand)

※ When using the electric type, connect with the solenoid valve according to the air ciruit provided by our company.

Air Feeder Size

MODEL AF-0405 S AF-0415 S AF-0607 S AF-0620 S AF-1010 S AF-1015 S AF-1030 S AF-1515 S AF-1530 S AF-2020 D AF-2515 D AF-2525 D AF-3016 D AF-3030 D
A (mm) 223 424 279 540 367 460 772 472 815 614 516 738 588 859
B (mm) 98 98 136 136 190 190 200 248 270 320 375 390 460 460
C (mm) 39 39 41.5 41.5 46.5 46.5 51.5 51.5 56.5 56.5 56.5 62 62 62
D (mm) 120 120  167 167 172 172 205 205 210 210 210   215  
D' (mm) 99 99  131 131 136 136 160 160 165 165 165   170  
E (mm) 8.5 8.5 10 10 12 12 12 12 12 12 12 65 12 49.5
F (mm) 76 76 114 114 160 160 170 220 230 280 335 282 400 345
F' (mm)   100   125     200 125 200 170 135 205 150 260.5
G (PT) 1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8"
H (mm) 2-C/B M8 2-C/B M8 2-C/B M8 2-C/B M8 2-C/B M10 2-C/B M10 4-C/B M10 4-C/B M10 4-C/B M10 4-C/B M10 4-C/B M10 4-C/B M10 4-C/B M10 4-ø12.5 HOLE
J (mm) 30 30 38 38 45 45 50 50 55 55 55 85 50 90
K (mm) 40 40 60 60 100 100 100 150 150 200 250 250 300 300
L (mm) 17 17 20 20 24 24 28 28 35 35 35   45  
M (mm) 26 26 82 82 108 108 122 122 142.5 142.5 142.5 186.5 186.5 186.5
P (mm) 30 50x2 35 50X3 50 50 75X3 50X2 75X3 70X2 80 80X2 80 100X2
S (mm) 90 235 110 315 140 180 435 250 450 320 270 400 320 460

- Specifications and size may be changed without notification due to product development.
- Above models are fundamental models. Other models are produced upon order.
- Start air feeder after installing the air unit.

※ These specifications and dimensions are for reference only.
And these are subject to change without prior notice depending on the product development process of our company.

※ If processing of the assembly is required, be sure to check the actual size of the product for the relevant.

※ Other models which are not in the list of specification shall be produced after discussion.

Outside View

Precautions of Air Feeder

  • Operate Air Feeder after installation of AIR UNIT (Filter-Regulator-Lubricator SYSTEM)
  • Recommended air pressure: 3~6kg/㎠
  • Recommended air temperature: 0~60℃
  • Recommended operating time: 8 hour/1 day
  • A drop of oil is supplied per minutes through Lubricator,
    [ ※ Slide-way fluid or hydraulic oil is supplied: Volatile oil such as WD-40, sewing machine oil and press oil shall not be used x ]
  • Never do not place any part of the body near the pilot (operating switch) when compressed air is being input (or product operating).
  • All products in the above table should be used with uncoiler(or reel stand)
  • When using the electric type, connect with the solenoid valve according to the air ciruit provided by our company.